12F612 - 3Ø/1Ø Solid Dielectric Recloser
Revision 3
May 14, 2013
Notes:
- Min. 50 ft. pole required for installation on joint pole.
- Important — connect control transformer to source side! Control transformer is internally fused and does not require a cutout.
Note: Drill holes as required to obtain switch spacing shown above.
| Compatible Unit | Description | Quantity |
|---|---|---|
| BA10B | XFMR, Control Power 1kVA 120V | 1 |
| C0113 | Wire, 336.4 kcmil AAC 19-str | 86 |
| DB0208 | Recloser, 3Ø 14kV 630A STS Solid Dielectric | 1 |
| D0502 | Switch, 600A 15kV Disconnect Xarm Mount | 6 |
| F0230 | Riser, 3" PVC - Control Cable | 1 |
| I0103 | Insulator, Spool w/ Rack #2 | 1 |
| I0322 | Insulator, 15kV Polymer Suspension | 4 |
| I0329 | Insulator, 15kV Polymer Suspension | 1 |
| N0110 | Plate, Cu Ground 288 in2 | 1 |
| R0302 | Capacitor Bank and Control & Protective Equipment Racks | 1 |
| R1115 | Split Bolt Assembly, Pole Top | 1 |
| T030* | Clamp, Straight Line | 6 |
| T0704 | Terminal, Comp 90° 336.4 kcmil AAC | 3 |
| T0711 | Terminal, Comp Captive Bolt 336.4 kcmil AAC | 12 |
| T0924 | Bar, Extension Terminal Single Tap | 9 |
| T0925 | Bar, Extension Terminal Double Tap | 3 |
| T0953 | Stainless Steel Bolt Assembly | 6 |
| X0414 | Crossarm, Wood 4-Pin 10' | 1 |
| Z010* | Clamp, Hotline | 1 |
| Z0102 | Clamp, Hotline #2 Al 6-336.4 kcmil | 7 |
| Z068+ | Connector, Mini-Wedge | 1 |
| Z063* | Connector, Wedge | 9 |
| Z0701 | Connector, C-Crimp #4 to #4 | 2 |