12F316 - 3Ø Tangent w/ 3Ø Buck
Revision 9
Aug 31, 2020
Notes:
- Minimum 7'-0" for poles up to 45' in height. Increase spacing to 8'-0" for poles 50' and taller.
- Down guys and anchors specified are based on 336.4 kcmil AAC primary and 3/0 AAC neutral with a maximum guy attachment height/guy lead ratio of 2:1.
- This assembly is intended for primary conductors with a maximum working tension of 2,500 lb/Ø or less. For deadending conductors with a maximum working tension between 2,500 lb/Ø and 4,000 lb/Ø refer to Assembly Unit 12F365.
| Compatible Unit | Description | Quantity |
|---|---|---|
| A0102 | Anchor, 12" Single Helix | 1 |
| C0550 | Tap Wire, Insul 4/0 Soft Drawn Copper | 36 |
| G0111 | 3/8" Guy w/ FG Strain Insul 20' Lead on 45' Pole (Med Loads,1-Bolt/2-Lag Mounting) | 1 |
| G0115 | 3/8" Guy w/ FG Strain Insul 20' Lead on 45' Pole (Med Loads) - No Attachment | 2 |
| I0103 | Insulator, #2 Single Point Secondary Rack | 2 |
| I0390 | Insulator, Sgl Pole Top Pin w/ Polymer Vise-Top Insulator | 1 |
| I0387 | Insulator, Sgl Polymer Vise-Top Insulator - 5/8" x 6-1/2" Pin Fiberglass Crossarm Mount | 3 |
| I0321 | Insulator, Sgl DE Insulator (Fittings: Clevis-Eye) | 2 |
| I0327 | Insulator, Sgl DE Insulator w/ 14” Eye Bolt - One-Way Pole Mount DE | 1 |
| R1113 | Split-Bolt, Crossarm | 1 |
| T010+ | Deadend, Preform | 1 |
| T030* | Clamp, Straight Line Deadend | 3 |
| X0201 | Crossarm, 10' Deadend 3-Pos. Lt. Duty Unitized Assembly | 1 |
| X0301 | Crossarm, 10' Tangent Fiberglass | 1 |
| Z063+ | Connector, Wedge | 6 |
| Z063* | Connector, Wedge | 2 |
