12F607 - 3Ø Regulator Installation, Single Pole Mounting
Revision 11
Aug 27, 2020
Note: This standard has been updated with a fiberglass crossarm but the drawing has yet to be updated.
Notes:
- Minimum 55' Class H2 pole required for regulator installation, assuming a joint use buy-in of 45'.
- This standard is for a single pole mounted regulator assembly. Order three 12F607 Assembly Units for 3Ø regulator bank installations.
- Typical spacing is 12' between regulators for 3Ø regulator bank installations.
- All three regulators are controlled by the center control panel. Wire the control wire from the outer regulators to the center pole. Use cable tie spacers and 13.5" cable ties to string the control cable along the neutral (See Compatible Unit R1040-R1044).
- Contact System Planning & Protection to determine if a DA antenna is required (See Compatible Unit J0401 & J0402).
- Connect S and L terminals as shown.
| Compatible Unit | Description | Quantity |
|---|---|---|
| C0502 | Wire, #4 Cu WP SD Sol | 30' |
| C0550 | Tap Wire, Insul 4/0 Soft Drawn Copper | 40' |
| D0515 | Switch, 15kV 600A Reg. Bypass Inertia | 1 |
| DB0306 | Regulator, 1Ø 250kVA 328A | 1 |
| DB0326 | Control Cable, Regulator, 60' | 1 |
| F0230 | Risers, 3" PVC - Control Cable | 1 |
| I0103 | Insulator, Spool w/ Rack #2 | 1 |
| I0317 | Insulator, 15kV Polymer Suspension | 1 |
| I0380 | Insulator, 15kV Polymer Vertical Clamp Top | 3 |
| N0110 | Plate, Cu Ground 288 in² | 1 |
| R0675 | Bolt, Machine 7/8" x 14" | 2 |
| R0735A | Washer, Galv Double Coil Spring Lick 7/8" | 2 |
| R0745 | Washer, Galv Sq 4" Curved 15/16" Hole | 2 |
| R1801 | Bracket, Standoff with 12" T-Slot | 2 |
| T030* | Clamp, Straight Line | 1 |
| T0700 | Terminal, Comp Straight 336.4 kcmil AAC | 2 |
| T0707 | Terminal, Comp Right-Handed 336.4 kcmil AAC | 2 |
| T0710 | OH Compression Terminals, 336.4 kcmil AAC & ACSR Slotted Paddle | 2 |
| T0711 | OH Compression Terminals, 336.4 kcmil AAC & ACSR Captive-Bolt Paddle | 2 |
| T0737 | Stem Connector, 336.4 & 350 kcmil AAC Str | 2 |
| T0953 | Stainless Steel Bolts, 1/2” x 1-3/4” | 4 |
| T0955 | Stainless Steel Bolts, Bolt, SS 1/2" x 2-1/2" | 4 |
| X0301 | Crossarm, 10' Single Tangent Fiberglass | 1 |
| Z0102 | Clamp, Hotline #2 Al 6-336.4 kcmil | 2 |
| Z060+ | Connector, H-Type Al Compression | 2 |
| Z0701 | Connector, Squeezon Cu (#150) #6-#2 to #6-#2 | 4 |