12U310 Alt DE 3Ø UG Terminal Pole (#2 or 1/0 Al)
Revision 11
Aug 27, 2020
Note: This standard has been updated with a fiberglass crossarm but the drawing has yet to be updated.
Notes:
- Assembly 12U309 is the preferred installation for a 3Ø riser mounted on a deadend pole. If the conduit must be installed on the front of the pole, then this Assembly may be used as an alternate.
- The concentric neutral from each cable shall be individually connected to the system neutral with an H-Type aluminum compression connector (see Compatible Unit Z0601 - Z0620).
| Compatible Unit | Description | Qty |
|---|---|---|
| E0202 | Cutout, With 100A Fuseholder | 3 |
| E1--- | Fuses, "T" Link Primary Distribution | 3 |
| F0213 | Riser, 4" PVC w/ 90° Fiberglass Bend - 3Ø #2 & 1/0 Primary | 1 |
| I0387 | Insulator, Sgl Polymer Vise-Top Insulator - 5/8" x 6-1/2" Pin Fiberglass Crossarm Mount | 2 |
| I0392 | Insulator, 15kV Sgl Stl Pole Top Pin w/ Polymer Vise-Top Insulator (For Pole Top Deadending Only) | 1 |
| K0201 | Arrester, Overhead, MOV, 10kV Duty-Cycle / 8.4kV MCOV | 3 |
| N0110 | Ground Plate Installation on Wood Pole | 1 |
| R0103 | Bracket, Cutout Xarm Mount w/ 2, 3/8” x 8” CB | 3 |
| R0206 | Bracket, Cable Term Crossarm-Mount (#1 Pothead Bracket) | 3 |
| T101# | Cable Termination Kit for Riser Poles | 3 |
| X0301 | Crossarm, 10' Single Tangent Fiberglass | 1 |
| Z010* | Clamp, Hotline | 3 |
| Z060+ | Connector, H-Type Al Compression | 4 |
| Z0701 | Connector, C-Crimp Cu #4 - #4 | 3 |