12U319 3Ø UG Terminal Pole w Gang-Op Switch (1100 kcmil Al)
Revision 3
Aug 27, 2020
Note: This standard has been updated with a fiberglass crossarm but the drawing has yet to be updated.
Notes:
- Wire framing must be ordered separately. See 12F310 3Ø 10ft deadend arm or equivalent framing.
- For existing pole installations, replace N0110 (ground plate) with N0101 (ground rod).
Notes:
- Wire framing must be ordered separately. See 12F303 3Ø 10ft tangent arm or equivalent framing.
- For existing pole installations, replace N0110 (ground plate) with N0101 (ground rod).
| Compatible Unit | Description | Qty |
|---|---|---|
| C0550 | Tap Wire, Insul 4/0 Soft Drawn Copper | 30 |
| C0707 | Wire, 4/0 Cu 19-Str SD | 20 |
| D0505SC | Switch, 3Ø Gang-Operated Unitized Conventional Mounting - S&C | 1 |
| F0216 | Riser, 6" PVC w/ 90° Fiberglass Bend - 3Ø 750 or 1000 kcmil Primary | 1 |
| K0201 | Arrester, Overhead, MOV, 10kV Duty-Cycle / 8.4kV MCOV | 3 |
| N0110 | Ground Plate Installation on Wood Pole | 1 |
| T1006 | Cable Term, 1000 kcmil Al Jacketed | 3 |
| T0700 | Compression Terminal, 336.4 kcmil AAC 2-Hole (Straight) | 6 |
| T0704 | Compression Terminal, 336.4 kcmil AAC 2-Hole (90°) | 3 |
| W0201 | Holder, Plastic 15 kV OH Switch Number 21” x 4” | 2 |
| X0301 | Crossarm, 10' Single Tangent Fiberglass | 1 |
| Z0102 | Clamp, Hotline Al (#2) #6-336.4 kcmil | 3 |
| Z06* | Connector, Wedge | 3 |
| Z06+ | Connector, Wedge | 1 |
| Z069+ | Connector, Wedge | 1 |
| Z0707 | Connector, C-Crimp Cu 3/0-4/0 to #6-#2 | 3 |
| Z0708 | Connector, C-Crimp Cu 3/0-4/0 to 1/0-2/0 | 3 |
| Z0709 | Connector, C-Crimp Cu 3/0-4/0 to 3/0-4/0 | 1 |