12U512DF 3Ø 15kV PME-12 Type Dead-Front Air-Insulated Padmount Switchgear
Revision 6
Apr 17, 2020
Notes:
- Vault and grounding is typically provided by the customer. These materials are not included with this assembly and must be ordered separately if needed.
Optional Compatible Unit Description Qty V0501 Dead-Front Pad-Mounted Switchgear Vault 1 N0310 Pad-Mounted Switchgear Grounding 1 - The dead-front pad-mounted switchgear (MID 1002410) includes SML-20 fuseholders for each fuse position. The switchgear compatible (D0553) also includes three additional fuseholders (MID 1002493) for spares. However, SMU-20 fuses have to be ordered separately. Refer to Compatible Unit E0551 for SMU-20 fuse Compatible Units E3015 - E3200. Order a fuse for each fuseholder including the spares. The spare fuseholders require fuses in order to be assembled and hung in the door.
- Elbow terminations are not provided with this assembly. 600A switched ways require 3-600A deadbreak elbows per circuit (refer to Compatible Units T1106 - T1108). 200A fused ways require a 200A loadbreak elbow per cable (refer to Compatible Units T1103 - T1105). Order deadend insulating caps (dust caps) for all unused 600A and 200A bushings (refer to Compatible Units T1701 - T1703).
- Gel-filled wedge connectors are not provided with this assembly. They are required for use with feeder conductors that have a separate 500 kcmil Al neutral.
- Install 3 vertical portable feed-thru bushings (Compatible Unit T1613) and six 200A deadend insulating caps (Compatible Unit T1701) in each 200A fused way chamber.
| Compatible Unit | Description | Qty |
|---|---|---|
| C0208 | Wire, #4 Cu Bare SD Sol | 40 |
| D0553 | Switch, 1 - 600A 3Ø Disc Sw & 3 - 200A 3Ø Fused Sw (PME-12) | 1 |
| E3---* | Fuse, SMU-20 | 12 |
| N0310* | Grounding Plate Installation on Padmount Switchgear Vault | 1 |
| R0153 | Rack, Cable 55-1/4" w/ 37 Cable Hook Support Holes, Galv Steel | 6 |
| R0161 | Hook, Cable Rack 4" Extension from Face of Rack, Galv Steel | 6 |
| R0163 | Hook, Cable Rack 10" Extension from Face of Rack, Galv Steel | 12 |
| R0166 | Clip, Locking Cable Rack Zinc Plated Steel | 18 |
| R0168 | Bolt, Anchor, Masonry 1/2" x 2-3/4" | 18 |
| R0169 | Tie, Plastic Cable Black 20" Heavy Duty | 18 |
| R0170 | Tie, Plastic Cable 11-3/4" | 6 |
| R0175 | Unistrut Channel Mounting for Vertical Support of Cables Entering Switch Cabinets | 2 |
| R0177 | Cable Support Bracket for Vertical Support of #2-1/0 Primary Cables | 9 |
| R0178 | Cable Support Bracket Mounting for Vertical Support of 350 - 1000 kcmil Primary Cables | 3 |
| T110-* | Elbow, Loadbreak Kit 1/0 Al 200A 15kV w/ Sealing Sleeve | 9 |
| T114-* | Elbow, Deadbreak Kit 600A 15kV | 3 |
| T1613 | Bushing, 200A Vertical Feed-Thru | 9 |
| T1701 | Cap, Deadend Loadbreak 200A 15kV | 18 |
| V0501* | 6'8"W x 12'8"L x 6'6"H Vault & 1'6"H Cover w/ 3'W x 3'L Diamond Plate & 64"W x 66"L Opening - PME Type Dead-Front Pad-Mounted Switchgear | 1 |
| Z0103 | Clamp, Hotline No. 1 Cu | 3 |
| Z0701 | Connector, Cu C-Crimpit #4 Sol - #4 Str to #6 Sol - #4 Str | 9 |
| Z0704 | Connector, Cu C-Crimpit 1/0 Sol - 2/0 Str to #8 Sol - #2 Str | 12 |
| Z1503* | Connector Insulator, Yellow, Gel Filled Connector, 500 - 4/0 Wedge Tap | 1 |