12U312 3Ø UG Terminal Pole (350kcm Al)

Revision 9
Aug 27, 2020

Note: This standard has been updated with a fiberglass crossarm but the drawing has yet to be updated.

Note:

  • The concentric neutral from each cable shall be individually connected to the system neutral with an H-Type aluminum compression connector (see Compatible Unit Z0601 - Z0620).

 

 
Compatible Unit Description Qty
C0550 Tap Wire, Insul 4/0 Soft Drawn Copper 30
D0502 Switch, 600A 15kV Disconnect Xarm Mount 3
F0214 Riser, 6" PVC w/ 90° Fiberglass Bend - 3Ø 350 kcmil Primary 1
K0201 Arrester, Overhead, MOV, 10kV Duty-Cycle / 8.4kV MCOV 3
N0110 Ground Plate Installation on Wood Pole 1
R0206 Bracket, Cable Term Crossarm-Mount (#1 Pothead Bracket) 3
T0700 Compression Terminal, 336.4 kcmil AAC 2-Hole (Straight) 6
T0704 Compression Terminal, 336.4 kcmil AAC 2-Hole (90°) 3
T0954 SS Bolt, 1/2” x 2” 12
T1004 Cable Term, 350 kcmil Al Jacketed & Unjacketed 3
X0301 Crossarm, 10' Single Tangent Fiberglass 1
Z0102 Clamp, Hotline Al (#2) #6-336.4 kcmil 3
Z06* Connector, Wedge 3
Z060+ Connector, H-Type Al Compression 4