12F707 - 3Ø 600A 15kV Disconnect Switch (Underbuild) (Obsolete)
Revision 13
Aug 27, 2020
This Assembly is obsolete. Please see 12F706
Notes:
- Framing shown here requires approximately 8’-9” of pole space from brace lags to neutral. If insufficient pole space is available, Assembly 12F705 should be used. Assembly 12F705 requires 7’-5” of pole space.
- The individual tags used to make up a complete switch number must be specified by MID number. Refer to Compatible Unit W0201 for a complete listing of switch number tag MID numbers. Specify enough tags to make up two switch numbers, one for each side of the pole.
| Compatible Unit | Description | Quantity |
|---|---|---|
| C0550 | Tap Wire, Insul 4/0 Soft Drawn Copper | 42' |
| D0502 | Switch, 600A 15kV Disconnect Xarm Mount | 3 |
| I0103 | Insulator, Spool w/ Rack #2 | 1 |
| I0322 | Insulator, 15kV Polymer Suspension | 6 |
| T030* | Clamp, Straight Line | 6 |
| T0714 | Terminal, Comp Captive Bolt 4/0 kcmil AAC/CU | 6 |
| T0924 | Bar, Extension Terminal Single Tap | 6 |
| W0201 | Holder, Plastic 15kV OH Switch Number 21" x 4" | 2 |
| X0301D | Crossarm, 10' Double Tangent Fiberglass | 1 |
| Z064* | Connector, Wedge | 6 |