12F703 - 3Ø 600A 15kV Disconnect Switch Mounting w/ 3-100A Loadbreak Cutouts (Obsolete)
This Assembly is obsolete. Please see 12F706
Revision 15
Aug 27, 2020
Notes:
- Framing shown here requires approximately 8’-9” of pole space from brace lags to neutral. If insufficient pole space is available, framing X0412 should be used, as it requires only 7’-5” of vertical pole space.
- The individual tags used to make up a complete switch number must be specified by MID number. Refer to Compatible Unit W0201 for a complete list of switch number tag MID numbers. Specify enough tags to make up two switch numbers, one for each side of the pole.
- Insulated tap wire is suitable up to 336 AAC. Larger conductors will require bare jumpers.
| Compatible Unit | Description | Quantity |
|---|---|---|
| C05* | Misc Insulated Tap Wire | 30' |
| D0502 | Switch, 600A 15kV Disconnect Xarm Mount | 3 |
| E0202 | Cutout, 100A 15 kV Polymer | 3 |
| I0103 | Insulator, Spool w/ Rack #2 | 1 |
| I0322 | Insulator, 15kV Polymer Suspension | 4 |
| I0329 | Insulator, 15kV Polymer Suspension | 1 |
| R0102 | Bracket, Cutout Crossarm Mount | 3 |
| T030* | Clamp, Straight Line | 6 |
| T0714 | Terminal, Comp Captive Bolt 4/0 kcmil AAC/CU | 6 |
| T0924 | Bar, Extension Terminal Single Tap | 6 |
| W0201 | Holder, Plastic 15kV OH Switch Number 21" x 4" | 2 |
| X0301D | Crossarm, 10' Double Tangent Fiberglass | 1 |
| Z010* | Clamp, Hotline | 6 |
| Z064* | Connector, Mini-Wedge | 6 |