12F715 - Switch, 600A 15kV Gang-Operated Control-Rod on 3Ø Buck Pole - Obsolete

Notes:

1. Assembly includes an S&C control rod extension (Compatible Unit D0506SC) for a maximum switch installation height of 52’ above grade. When switch mounting height is less than 38’ above ground, remove Compatible Unit D0506SC from the assembly.
2. Switch handle and operating rod may be positioned anywhere within 90° clockwise of the pole face. Switch handle and operating rod should be installed so as to minimize hazards to the operator and avoid conflicts with other pole mounted equipment.
3. Ground switch control rod and handle with single ground plate or ground rod. Refer to Compatible Unit N0101 or Compatible Unit N0110. Depending on switch type, connect switch control rod or switch control handle to ground wire as shown in switch grounding detail drawing.
4. Using reflective decals, stencil switch number on control rod directly above switch operating handle.
5. 90 degree terminal bar extensions available T0924-6