12V606 - 1Ø Regulator Pole Mounting

Revision 2
Apr 29, 2014

Notes:

  1. A minimum 55' Class H2 pole is required for 1Ø regulator installations.
  2. For 2Ø installations accessible by a service truck per the requirements of T&D Guideline 4-2-1.1, install regulators on individual poles. If it is determined a turnout is required, refer to Assembly Unit 12F605 for platform mounting option.

Material List
Compatible Unit Description Quantity
C0502 Wire, #4 Cu WP SD Sol 15'
D0512 Switch, 600A 15.5kV Left-hand Source/Load/Bypass 1
DB0304 Regulator, 150A, 114.3 kVA, 1Ø 1
I0101 Insulator, Spool w/ Rack #1 1
I0329 Insulator, 15kV Polymer Suspension 1
N0104 Plate, Cu Ground 288 in² 1
R0301 Equipment Mounting Bolt, 1Ø Pole-Mount Transformer 1
T030* Clamp, Straight Line 2
X0301 Crossarm, 10' Tangent Fiberglass 1
Z010* Clamp, Hotline 2
Z0500 Tap, Bar #8 Sol-2/0 Str 4
Z060+ Connector, Mini-Wedge 1
Z0701 Connector, C-Crimp Cu #4-#4 5