12U303 3Ø 1100kcm Feeder Splice Vault

 

Notes:

1. Vault and grounding are not included with this assembly and must be ordered separately if needed.
   

   Optional Compatible Unit	Description	Qty
   V0210	Concrete Pulling/Splicing Vault	1
   N0311	Splice Vault Grounding	1

2. Cable racks are mounted to interior walls of vaults using two 1/2" anchor bolts (Compatible Unit R0168). They can also be mounted to unistrut type channel using 1/2" captive unistrut nuts (MID 761082), 1/2" x 1-3/4" SS hex-head bolts (MID 103359), 1/2" SS flat washers (MID 191627), and 1/2" SS belleville washers (MID 191635).

 

* These Compatible Units are not included in the assembly and must be ordered as required for the project. See Note 1.

Compatible Unit	Description	Qty
N0311*	Grounding Plate Installation on Splice Vault or Future Padmount Switchgear Vault	1
R0153	Rack, Cable 55-1/4" w/ 37 Cable Hook Support Holes, Galv Steel	6
R0163	Hook, Cable Rack 10" Extension from Face of Rack, Galv Steel	12
R0166	Clip, Locking Cable Rack Zinc Plated Steel	18
R0168	Bolt, Anchor, Masonry 1/2" x 2-3/4"	18
R0169	Tie, Plastic Cable Black 20" Heavy Duty	18
V0210*	Vault, 2-Piece Concrete 6'8"W x 12'8"L x 6'6"H & Cover, Vault 6'8"W x 12'8"L x 18"H with (3) 3'W x 3'L Diamond Plates	1
Z1362	Splice, Underground Elbow 1100 Al	3

.