12F601 - 1Ø Transformer Mounting on Pole w/ Existing Crossarm Framing
Revision 10
Aug 21, 2023
Notes:
- Minimum 7’-0” for poles up to 45’ in height. Increase spacing to 8’-0” for poles 50’ and taller.
- Transformer bolt spacing for 50kVA and below is 11.5", spacing for 75kVA and above is 23.25"
- Install connections to common neutral from ground wire, transformer case ground, primary and secondary neutrals.
- Do Not remove transformer case ground unless cutout is open.
| Compatible Unit | Description | Quantity |
|---|---|---|
| C0502 | Wire, #4 Cu WP SD Sol | 6' |
| E0202 | Cutout, LB 7.8/13.5kV | 1 |
| N0110 | Plate, Cu Ground 288 in² | 1 |
| R0102 | Bracket, Cutout Crossarm Mount | 1 |
| R0301 | Bracket, 1Ø Pole-Mount Transformer | 1 |
| Z010* | Clamp, Hotline | 1 |
| Z060+ | Connector, H-Type Al Compression | 3 |