12F615 - 3Ø Fixed Capacitor Bank Mounting
Revision 8
Mar 25, 2020
CAUTION: Allow 5 minutes after opening cutouts for capacitors to discharge, then short circuit and ground terminals before handling.
Notes:
- Minimum 7'-0" for poles up to 45' in height. Increase spacing to 8'-0" for poles 50' and taller.
- Bond capacitor neutral and cases to mounting rack. Bond mounting rack and system neutral to pole ground.
- See Compatible Unit Section D for pre-assembled capacitor bank kVAR size selections.
| Compatible Unit | Description | Quantity |
|---|---|---|
| DB01* | 1Ø Fixed Capacitor Tank | 1 |
| E0202 | Cutout, 100A 15 kV Polymer | 3 |
| N0110 | Ground Plate Installation on Wood Pole | 1 |
| R0102 | Bracket, Cutout Xarm Mount w/ 2, 3/8" x 6" CB | 3 |
| R0302 | Bolt Assemblies for Mounting Equipment on Single Pole Structures | 1 |
| Z060+ | Connector, H-Type Al Compression | 1 |
| Z010* | Clamp, Hotline Al | 3 |
| Z0701 | Connector, C-Crimp Cu #4-#4 | 2 |