1002771.1 DA Recloser Sign
Click here for a PDF of this Material Standard
Revision 0
Apr 12, 2012
1. Scope
This specification applies to the flat-surfaced aluminum sign illustrated in Figure 1 on the right.
These signs will be used outdoors on various surfaces.
2. Material ID Number
This specification applies to the following District Material ID Number: 1002771.
3. Size
Sign shall be 24" tall x 3" wide. Copy legend shall be Helvetica Narrow Bold, or District approved equivalent, 2" in height.
4. Color
Black UV inhibited copy legend on a yellow engineering grade UV inhibited reflective background.
5. Material
3M 3271 yellow Engineering Grade Reflective film, laminated to .04" aluminum backing. Sign shall have 6 thru holes 1/8" in diameter spaced as shown in Fig. 1. Aluminum backing plate, including holes, shall have no protrusions, sharp edges, or corners.
6. Attachment of Labels
Labels shall be smoothly attached to the backing material for maximum adhesion. Labels shall be applied in a craftsperson-like manner on a properly cleaned and prepared surface. Labels shall be free of air bubbles, lifting, or peeling (curled) edges or corners.
7. Outdoor Durability
Five years minimum, with exterior exposure.
8. Solvent Resistance
Sign shall be resistant to degradation by petroleum solvents and greases.
9. Storage Stability
Ten years minimum under normal storage conditons (75° F, 50% relative humidity). Material must be mildew resistant.
10. Packaging
Signs shall be packaged to protect them from damage during shipping and handling.