1000975.1 Blank Self-Laminating
Click here for a PDF of this Material Standard
Revision 1
Dec 20, 2010
1. Scope
This specification applies to District Cat ID 1000975 tags as illustrated. These tags shall be designed for outdoor application.
2. Material and Tag Requirements
Refer to District Material Standard TAGMAT1.
3. Size
Tags shall be 4-3/4” high x 2-3/8” wide, with a tolerance of +/- 1/32”.
4. Color
Tags shall be have a UV resistant black PUD logo copy on a white background.
5. Tag Options
The tag shall include the following options: Hole, Grommet.
6. Packaging Instructions
Tags shall be packaged in clear Zip-Loc bags, 25 tags per bag.
7. Material ID Number and Identification
Each tag may be marked with the manufacturer’s name or logo and the District Material ID or material standard number at the manufacturer's option. If the manufacturer chooses to mark each card it shall be in a maximum size 8 font and located near the lefthand edge on the eyelet end of the card in the areas indicated in the illustration on page 1 of this specification.