5000810.1 Mesh Flagger Pants

Click here for a PDF of this Material Standard

1. Scope

This specification covers the requirements for Mesh Flagging Pants as shown above.
This is an evolving document and may change at any time.

2. Reference Standards

Unless otherwise stated in this specification, the Mesh Flagging Pants shall comply with the latest revision of the following standard: ANSI/ISEA 107 American National Standard for High-Visibility Safety Apparel

3. Material

Mesh Flagging Pants shall be in compliance with all requirements of an ANSI/ISEA 107-2015 Class E garment. Mesh Flagging Pants shall be high-visibility lime in color, 100% Polyester mesh material, and have (2) 2” wide Orange Prismatic Reflective Bands below the knee of each pant leg as shown above.

4. Detail

Mesh Flagging Pants shall have left and right side pocket access slits, a drawstring waist with elastic back, and elastic bottom cuffs.

5. Durability / Labeling

Mesh Flagging Pants shall have a sewn-in label(s) indicating pant size, per ANSI/ISEA 107-2015 Section 10.5 labeling requirements.

6. Packaging

Mesh Flagging Pants shall be individually packaged in a clear plastic bag with size labeling shown for shipping and storage.

7. Material ID Numbers

This specification applies to the following District Material ID Numbers and sizes:

5000810 (SM – MD) Waist up to 48” Inseam 29”
5000811 (LG – XL) Waist up to 54” Inseam 32”
5000812 (2X – 4X) Waist up to 60” Inseam 34”