1003301.1 Flame-Resistant (FR) Clothing Accessories

Click here for a PDF of this Material Standard

1. Scope

This material standard covers the general requirements for manufacturing and supplying all of the District's Flame-Resistant (FR) Clothing Accessories.

2. Reference Standards

Where applicable and unless otherwise stated in this specification, garments shall comply with the latest revision of District Material Standard FRCLOTHMAT.

3. FR Beanie

3.1 Material

All materials used shall meet NFPA 70E standard, latest revision. All thread used shall be FR rated.

3.2 Construction

Beanies shall be designed to be worn by themselves or beneath a hard hat.

3.3 Ratings

Beanies shall have a minimum rating of HRC-2 and an Arc Thermal Performance Value (ATPV) of at least 15 cal/cm².

3.4 District Catalog Identification Numbers

The requirements above correspond to the following District Material Master ID's:
5000563 FR BEANIE

4. FR Bra

4.1 Material

All materials used shall meet NFPA 70E standard, latest revision. All thread used shall be FR rated.

4.2 Construction

Bras shall be designed with a stetchable, breathable, moisture wicking, antimicrobial, FR material and be constructed to reduce binding. Bras shall have tagless labeling.

4.3 Ratings

Bras shall have a minimum rating of HRC-1 and an Arc Thermal Performance Value (ATPV) of at least 4.0 cal/cm².

4.4 District Catalog Identification Numbers

The requirements above correspond to the following District Material Master ID's:
5000564 FR BRA

5. FR Baselayer Short-Sleeve Shirt

5.1 Material

All materials used shall meet NFPA 70E standard, latest revision. All thread used shall be FR rated.

5.2 Construction

Base layer Short-Sleeve Shirts shall be designed with a stetchable, breathable, moisture wicking, antimicrobial, FR material and be constructed to reduce binding. Base layer Short-Sleeve Shirts shall have tagless labeling. Base layer Short-Sleeve Shirts do NOT require identification with PUD embroidered logo.

5.3 Ratings

Base layer Short-Sleeve Shirts shall have a minimum rating if HRC-1 and an Arc Thermal Performance Value (ATPV) of at least 4.0 cal/cm².

5.4 District Catalog Identification Numbers

The requirements above correspond to the following District Material Master ID's:
5000565 FR SHIRT BASELAYER SHORT-SLEEVE

6. FR Baselayer Pant

6.1 Material

All materials used shall meet NFPA 70E standard, latest revision. All thread used shall be FR rated.

6.2 Construction

Base layer Pants shall be designed with a stetchable, breathable, moisture wicking, FR material that will maximize warmth and be constructed to reduce binding. Base layer Pants shall have tagless labeling.

6.3 Ratings

Base layer Pants shall have a minimum rating of HRC-2 and an Arc Thermal Performance Value (ATPV) of at least 15 cal/cm².

6.4 District Catalog Identification Numbers

The requirements above correspond to the following District Material Master ID's:
5000566 FR PANT BASELAYER